Magnetic Unshieled Electronic Component Wire Rauni Smd Chip Ferrite Copper Core Inductor Coil
1. MISALI NO: MS1360-330M
2. Girma: don Allah duba cikakkun bayanai kamar yadda ke ƙasa
 | A | 13.65± 0.35 |
| B | 12.6 ± 0.2 | |
| C | 6.0 Max | |
| D | 3.8 ± 0.5 | |
| E | 2.5 ± 0.5 |
Bukatun Lantarki
| PARAMETER | BAYANI | SHARADI | KAYAN GWADA |
| L (uH) | 33.0 μ H± 20% | 100KHz/1.0V | Farashin 6377 |
| DCR(mQ) | 70.0mQMAX | ku 25C | Saukewa: TH2512A |
| Na zauna (A) | 7.0A TYP L0A*70% | 100KHz/1.0V | MICROTEST 6377+6220 |
| Ina (A) | 4.0A TYP △T≤40C | 100KHz/1.0V | MICROTEST 6377+6220 |
Halaye
(1).Duk bayanan gwajin sun dogara ne akan yanayin 25C.
(2).DC halin yanzu (A) wanda zai haifar da kimanin △T40C
(3).DC halin yanzu (A) wanda zai sa L0 ya ragu kusan 30% Nau'in
(4).Yanayin zafin aiki: -55C~+125C
(5).Yanayin zafin jiki (hawan yanayi + yanayin zafi) bai kamata ya wuce 125 C a ƙarƙashin yanayin aiki mafi muni ba.kewayawa zane, bangaren.Girman alamar PWB da kauri, kwararar iska da sauran tanadin sanyaya duk suna shafar yanayin zafin jiki.Ya kamata a tabbatar da yanayin zafin sashi a aikace-aikacen kogon
Aikace-aikace
(1) Low profile, high halin yanzu samar da wutar lantarki.
(2) Na'urori masu ƙarfin batir.
(3) Masu juyawa DC/DC a cikin tsarin wutar lantarki da aka rarraba.
(5) Masu juyawa DC/DC don tsararrun kofa na fili.
Cikakkun bayanai
1. Tape da Reel Packing, 500pcs / reel;
2. Ƙididdigar akwatin ciki: 350 * 340 * 40mm, ƙayyadaddun akwatin waje: 370 * 360 * 255mm;
3. Sanya samfuran jakar kumfa na iska da aka sanya a cikin akwatin, an rufe.(Jakar kumfa: 37 * 45cm), a waje da akwatin za a rufe, akwatin ciki a cikin akwatin.
4. Marufi na musamman yana samuwa.
Sharuɗɗan ciniki
1. Biya:
1) T / T 30% a gaba, daidaita 70% da za a biya kafin aikawa.
2) L/C.
2. Port of loading: Shenzhen ko Hongkong Port.
3. Rangwamen kuɗi: ana bayarwa bisa ga adadin tsari.
4. Lokacin bayarwa: kwanaki 7-30 bisa ga adadin tsari.
Jirgin ruwa
Muna jigilar kayayyaki ta DHL, UPS, FEDEX, SF, EMS da TNT.
Lokacin Jagorar Samfurin yana kusan kwanaki 3-7
Lokacin Jagorar oda shine kusan kwanaki 20-30.
(Idan akwai samfurori a hannun jari, za mu iya isar da su lokaci ɗaya bayan karɓar biyan kuɗi.)
FAQ
A:Mu ƙwararrun masana'anta ne wajen yin inductor, coil ferrite, shaƙewar yanayin gama gari, da sauransu.
A:Ee.Abin farin cikinmu ne don samar muku da samfurori kyauta.
A:Yawancin lokaci zai ɗauki kimanin kwanaki 3-5 na aiki.
A:Dogara akan abu, kuma yawanci makonni 3-4 saboda muna ɗaukar ƙarin matakai don tabbatar da ingancin mu.
A:Duk samfuranmu suna nunawa akan gidan yanar gizon mu, koyaushe ana maraba da ku don neman ƙarin bayani kai tsaye.
